set terminal postscript eps color enhanced font "Helvetica,14pt" size 9cm,6cm 
set output "conversion.eps"

#set terminal pngcairo enhanced font "Helvetica,14pt" size 1800,1200
#set output "conversion.png"

# common settings
set logscale xy
set format xy "10^{%L}"
set tics scale 2
set tics nomirror
set xr [1E-5:1] #watts
set yr [1E-16:1] #watts
set border linewidth 1

set xlabel "Laser input power (watts)"
set ylabel "Bunched light output power (watts)" offset 0.8,0


#this work, for g2x 1550nm 3.63mW to 3.36mW
#set label "This work at 1550nm" at 0.005,0.0008

#this work, for g2x 780nm 15mW to 6mW
set label "This work" at 0.015,0.0006


#thermal sources
set label "MS^{1}" at 0.36,3.5E-13
set label "RGG^{2}" at 0.0012,2.5E-14
set label "EDFA^{3}" at 0.1,0.012

#spdc sources
set label "MRR^{4}" at 3E-5,1E-12
set label "FWM^{5}" at 0.65E-1,0.4E-13
set label "BBO^{6}" at 0.12E-3,0.5E-14
set label "PPKTP^{7}" at 2.5E-3,1.7E-15

L(x)=x #100% conversion efficiency
set label "100\% conversion" at 1E-4,0.5E-3 rotate by 12

M(x)=x*0.4 #40% conversion efficiency
set label "40\% conversion" at 1E-4,1E-5 rotate by 12

#M(x)=x*0.925 #92.5% conversion efficiency
#set label "92.5\% conversion" at 1E-4,2E-5 rotate by 12

N(x)=x*1E-10 #E-10% conversion efficiency
set label "10^{-10} conversion" at 1E-4,0.5E-13 rotate by 12

set label "Thermal" at 2.5E-5,0.9E-1
set label "SPDC" at 2.5E-5,0.9E-2

plot 'conversion_thermal.txt' using 1:2 notitle "Thermal" with points ps 1.5 lw 2 pt 7 lc rgb "red", 'conversion_spdc.txt' using 1:2 notitle "SPDC" with points ps 1.5 lw 2 pt 5 lc rgb "blue", L(x) lw 2 lc 'black' notitle, M(x) lw 2 dt 2 lc "black" notitle, N(x) lw 2 lc "black" notitle


reset